The 3DP MB irons combine the look and feel of a traditional forged blade with a massive amount of forgiveness. The most forgiving blade you'll ever hit, the MB has captivated Tour players by checking all the boxes and exceeding expectations with its exceptional stability and feel.

The 3DP X irons combine super-game improvement performance into a more compact, player's-inspired shape. You get the highest MOI possible in a smaller, more elegant profile, proving you don't have to sacrifice looks for performance.

The 3DP Tour Irons unlock a new level of performance. COBRA's proprietary internal 3D printed lattice optimizes weight distribution to deliver more forgiveness than was previously possible in an iron this size.

Limited-edition ZXi5 Black Chrome Irons showcase our most potent blend of power and playability, with a bold, blacked-out look. Our revolutionary i-FORGED process, combined with the latest Srixon ball speed and distance technologies, gives ZXi5 Irons unprecedented feel, speed, and power on every shot, while the black chrome finish enhances durability and helps reduce glare at address.

Club Specs

Shaft Specs

Shaft: True Temper Dynamic Gold MID 115 Tour Issue (Gunmetal) (Steel)

Grip Specs

Grip: Golf Pride MCC Black/Grey

Limited-edition ZXi7 Black Chrome Irons offer compact shaping and a bold, blacked-out look, made with all-new i-FORGED technology for the most supreme feeling Srixon Iron ever created. A single-piece forging delivers a sleek, highly-workable package, while its black chrome finish enhances durability and helps reduce glare at address.

Club Specs

Shaft Specs

Shaft: True Temper Dynamic Gold MID 115 Tour Issue (Gunmetal) (Steel)

Grip Specs

Grip: Golf Pride MCC Black/Grey

With a clean look at address, forged feel, and hollow head design, ZXi4 delivers the heightened forgiveness you need in a compact shape you’ll want to play.

i-FORGED CONSTRUCTION

ZXi4 Irons feature a softer SUS17-47 material, which delivers dramatically better feel than previous generations of ZX4 Irons. This softer material allows us to adjust loft and lie more easily to ensure the perfect fit.

MAINFRAME

MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the back side of the Iron face. At impact, this system amplifies ball speed and adds forgiveness.

TOUR V.T. SOLE

Our Tour V.T. Sole’s proprietary combination of sole widths, bounce angles, and notches to ensure a smooth glide through fairway, rough, and sand without any loss of speed.

PROGRESSIVE GROOVES

The 4i-7i feature wider grooves, while the 8i-SW have deeper, closer-set grooves to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strikes.

HOLLOW IRON SHAPES

ZXi4’s unique hollow design features moderate sole width, our longest blade length, and our highest offset for max forgiveness, all while still offering an appealing look at address.

All-new ZXi5 Irons represent our most potent blend of power, playability, and ultra-sharp looks. Our revolutionary i-FORGED process, combined with the latest Srixon ball speed and distance technologies, gives ZXi5 Irons unprecedented feel, speed, and power on every shot.

i-FORGED

Condensed Forging stretching from the high-toe area and along the topline of the Iron blade enhances overall strength, durability, and feel. Then the forged faces on ZXi5 are softened to improve this already exceptional feel.

MAINFRAME

MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the back side of the Iron face. At impact, this system amplifies ball speed and adds forgiveness.

TOUR V.T. SOLE

Our Tour V.T. Sole’s proprietary combination of sole widths, bounce angles, and notches to ensure a smooth glide through fairway, rough, and sand without any loss of speed.

PROGRESSIVE GROOVES

The 3i-7i feature wider grooves, while the 8i-AW have deeper, closer-set grooves to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strike.

PLAYERS DISTANCE SHAPES

ZXi5 features a slightly wider sole with moderate blade length and offset, giving attuned golfers enhanced distance, forgiveness, and workability—all with an ultra-clean look at address.

With a clean look at address, forged feel, and hollow head design, ZXi4 delivers the heightened forgiveness you need in a compact shape you’ll want to play.

i-FORGED CONSTRUCTION

ZXi4 Irons feature a softer SUS17-47 material, which delivers dramatically better feel than previous generations of ZX4 Irons. This softer material allows us to adjust loft and lie more easily to ensure the perfect fit.

MAINFRAME

MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the back side of the Iron face. At impact, this system amplifies ball speed and adds forgiveness.

TOUR V.T. SOLE

Our Tour V.T. Sole’s proprietary combination of sole widths, bounce angles, and notches to ensure a smooth glide through fairway, rough, and sand without any loss of speed.

PROGRESSIVE GROOVES

The 4i-7i feature wider grooves, while the 8i-SW have deeper, closer-set grooves to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strikes.

HOLLOW IRON SHAPES

ZXi4’s unique hollow design features moderate sole width, our longest blade length, and our highest offset for max forgiveness, all while still offering an appealing look at address.

A players’ Iron with compact shaping and tour-preferred looks, made with all-new i-FORGED technology for the most supreme feeling Srixon Iron ever created. A single-piece forging delivers a sleek, highly-workable package.

i-FORGED

Proprietary Condensed Forging inserts added strength in the hosel area, which allows for the use of new, softer S15C steel in the single-piece Iron body for unprecedented feel and control.

PUREFRAME

This generation of PureFrame uses a larger forged ridge in the body of the Iron just behind the sweet spot. We’ve expanded this ridge for even better feel, stability, and control.

TOUR V.T. SOLE

Our Tour V.T. Sole’s proprietary combination of sole widths, bounce angles, and notches to ensure a smooth glide through fairway, rough, and sand without any loss of speed.

PROGRESSIVE GROOVES

The 3i-7i feature wider grooves, while the 8i-AW have deeper, closer-set grooves to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strike.

PLAYERS IRON SHAPES

A thin topline, narrow sole, short blade, and minimal offset—the preferred look for tour-level and low-handicap golfers. These compact players Irons feature a muscle-back cavity for maximum workability and a razor-sharp look.

All-new ZXi5 Irons represent our most potent blend of power, playability, and ultra-sharp looks. Our revolutionary i-FORGED process, combined with the latest Srixon ball speed and distance technologies, gives ZXi5 Irons unprecedented feel, speed, and power on every shot.

i-FORGED

Condensed Forging stretching from the high-toe area and along the topline of the Iron blade enhances overall strength, durability, and feel. Then the forged faces on ZXi5 are softened to improve this already exceptional feel.

MAINFRAME

MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the back side of the Iron face. At impact, this system amplifies ball speed and adds forgiveness.

TOUR V.T. SOLE

Our Tour V.T. Sole’s proprietary combination of sole widths, bounce angles, and notches to ensure a smooth glide through fairway, rough, and sand without any loss of speed.

PROGRESSIVE GROOVES

The 3i-7i feature wider grooves, while the 8i-AW have deeper, closer-set grooves to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strike.

PLAYERS DISTANCE SHAPES

ZXi5 features a slightly wider sole with moderate blade length and offset, giving attuned golfers enhanced distance, forgiveness, and workability—all with an ultra-clean look at address.

With a clean look at address, forged feel, and hollow head design, ZXi4 delivers the heightened forgiveness you need in a compact shape you’ll want to play.

i-FORGED CONSTRUCTION

ZXi4 Irons feature a softer SUS17-47 material, which delivers dramatically better feel than previous generations of ZX4 Irons. This softer material allows us to adjust loft and lie more easily to ensure the perfect fit.

MAINFRAME

MainFrame saves additional weight and adds more MOI through an enhanced network of milled channels on the back side of the Iron face. At impact, this system amplifies ball speed and adds forgiveness.

TOUR V.T. SOLE

Our Tour V.T. Sole’s proprietary combination of sole widths, bounce angles, and notches to ensure a smooth glide through fairway, rough, and sand without any loss of speed.

PROGRESSIVE GROOVES

The 4i-7i feature wider grooves, while the 8i-SW have deeper, closer-set grooves to ensure consistent spin across the set. Laser milling between each groove, on every loft, enhances adds bite on every strikes.

HOLLOW IRON SHAPES

ZXi4’s unique hollow design features moderate sole width, our longest blade length, and our highest offset for max forgiveness, all while still offering an appealing look at address.

ZX5 Mk II is the perfect union of razor-sharp looks, power, and playability — combining a premium forged feel, advanced ball speed, and distance technology.

MAINFRAME

MainFrame is a variable thickness pattern of grooves, channels, and cavities carefully milled into the backside of the Iron face that maximizes flex at impact.

PLAYERS DISTANCE IRON SHAPES

A slightly wider sole with moderate blade length and offset help ZX5 Mk II cavity back Irons give attuned golfers enhanced distance, forgiveness, and workability while displaying a clean look at address.

PROGRESSIVE GROOVES

The 3i–7i feature wide grooves, ideal for longer shots in all conditions. The 8i–AW have deeper, closer set grooves which cut through grass and debris to enhance spin on approach shots. Laser milling between each groove, on every loft, enhances friction in all conditions.

TOUR V.T. SOLE

Tour V.T. Sole takes turf interaction to a whole new level of detail with a proprietary combination of sole widths, bounce angles, and notches that encourages a smooth glide through fairway, rough and sand to strike the ball solidly without losing speed.

ZX4 Mk II presents a sleek, narrow look at address, plus a premium forged feel. But behind that clean aesthetic is maximum forgiveness plus powerful distance, all thanks to its hollow head design and extra-strong lofts.

MAINFRAME

MainFrame is a variable thickness pattern of grooves, channels, and cavities carefully milled into the backside of the Iron face that maximizes flex at impact.

HOLLOW IRON SHAPES

Moderate sole width, our longest blade length, and our highest offset maximize the forgiveness of ZX4 Mk II hollow Irons while still offering an appealing look at address.

PROGRESSIVE GROOVES

The 4i–7i feature wide grooves, ideal for longer shots in all conditions. The 8i–AW have deeper, closer set grooves which cut through grass and debris to enhance spin on approach shots. Laser milling between each groove, on every loft, enhances friction in all conditions.

TOUR V.T. SOLE

Tour V.T. Sole takes turf interaction to a whole new level of detail with a proprietary combination of sole widths, bounce angles, and notches that encourages a smooth glide through fairway, rough and sand to strike the ball solidly without losing speed.

ZX5 Mk II is the perfect union of razor-sharp looks, power, and playability — combining a premium forged feel, advanced ball speed, and distance technology.

MAINFRAME

MainFrame is a variable thickness pattern of grooves, channels, and cavities carefully milled into the backside of the Iron face that maximizes flex at impact.

PLAYERS DISTANCE IRON SHAPES

A slightly wider sole with moderate blade length and offset help ZX5 Mk II cavity back Irons give attuned golfers enhanced distance, forgiveness, and workability while displaying a clean look at address.

PROGRESSIVE GROOVES

The 3i–7i feature wide grooves, ideal for longer shots in all conditions. The 8i–AW have deeper, closer set grooves which cut through grass and debris to enhance spin on approach shots. Laser milling between each groove, on every loft, enhances friction in all conditions.

TOUR V.T. SOLE

Tour V.T. Sole takes turf interaction to a whole new level of detail with a proprietary combination of sole widths, bounce angles, and notches that encourages a smooth glide through fairway, rough and sand to strike the ball solidly without losing speed.

The OPTM MAX-D Driver is engineered for players who need slice correction and a more left-biased ball flight. With strategic weight placement and a center of gravity positioned closer to the hosel, the MAX-D promotes higher launch, faster face closure, and straighter shots, helping you find more fairways with confidence.

The OPTM LS Driver is built for players seeking maximum speed and precision in a compact, low-spin design. By optimizing MOI (Moment of Inertia) while delivering the lowest possible POI (Products of Inertia), Cobra engineers have created our most accurate LS model ever. The result is low-spin performance with greater stability and tighter dispersion.

The OPTM MAX-K Driver achieves our highest MOI ever. Engineered through advanced supercomputing, its optimized weight placement and refined shaping create Cobra’s most forgiving driver head. Expect straighter shots, reduced side spin, and exceptional forgiveness.

The OPTM X Driver delivers a balance of speed, accuracy, and stability. Featuring optimized MOI (Moment of Inertia) and POI (Products of Inertia) in a slightly larger footprint than the LS, the X inspires confidence at address while providing consistent performance across the face.

The Junior OPTM MAX-K Driver is Cobra’s most forgiving driver head designed specifically for Junior golfers. Featuring the same exact head design and advanced technolgies as the standard MAX-K driver, the Junior model is configured with a lightweight Cobra Junior shaft in different length and weight spec options for different age and height ranges. With the purchase of a Junior driver, you are eligible for a FREE shaft upgrade as your junior grows into their game.

The Women's OPTM MAX-D Driver is engineered for players who need slice correction and a more left-biased ball flight. With strategic weight placement and a center of gravity positioned closer to the hosel, the MAX-D promotes higher launch, faster face closure, and straighter shots, helping you find more fairways with confidence. Featuring a 12° loft, lightweight shaft and grip, and a new Earl Grey colorway, the Women's model delivers control and confidence off the tee.

The Women's OPTM MAX-K Driver achieves our highest MOI ever. By maximizing MOI and minimizing POI across all three axes of rotation, Cobra engineers have created our most stable driver, delivering unmatched consistency, forgiveness, and accuracy in a confidence-inspiring head shape. Featuring a 12° loft, lightweight shaft and grip, and a new Earl Grey colorway, the Women's model delivers control and confidence off the tee.

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

OZ.1i is L.A.B. Golf's first putter model with a face insert. Its stainless steel insert provides a firmer feel and faster ball speeds. 

OZ.1i Custom offers our full range of custom options.

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

We know… it looks a little funny. DF 2.1 users often spend the first few holes catching flak about the way their putter looks. And as the putts keep falling, they spend the rest of the round fielding questions from their playing partners about why it works so well.

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

MEZZ.1 Custom makes it easy for any golfer to benefit from Lie Angle Balance. It looks pretty much like a normal putter. But it actually helps you make putts.

MEZZ.1 Custom is for standard-length builds only. For ArmLock & Sweeper builds, visit the MEZZ.1 MAX Custom page. 

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

We created LINK.1 for every golfer that loves the idea of using this timeless putter shape but doesn’t make enough putts with it.

With LINK.1, we sought to honor the most popular putter of all time. We’re also making it better, and that’s for the simple reason that LINK.1 stays square by itself.

To bring Lie Angle Balance to this blade, we hyper-engineered it from 303 Stainless Steel. It’s 100% CNC Milled with four screws on the heel side and six on the toe side to offer a wide range of length and lie angle options.

LINK.1 is 100% Made In the USA and built and balanced by L.A.B. Golf Craftsmen in our factory outside Eugene, Oregon.

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

Ever since we launched our first putter, Directed Force, golfers have been asking if we could make it less weird. DF3 is that putter.

DF3 still does everything golfers love about the original. It stays square by itself. It’s still irrationally forgiving on mishits. But there’s a lot less to think about.

The DF3 is entirely CNC milled from 6061 aluminum, with 8 screws on the bottom made of steel or tungsten in various densities to precisely target swing weight and lie angle balance each putter.

Machined right here in the good ol' U.S.A., each head is then assembled and hand-balanced at our factory in Creswell, Oregon.

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

Outrageous stability. Now available for Standard-Length, Counter-Balanced, ArmLock, and Sweeper builds.

Please Note: Expect delivery 4-6 weeks from the time of purchase. Lead times are subject to change.

A tour-inspired design meets Lie Angle Balance. OZ.1 uses an all-aluminum construction that delivers L.A.B. Golf's signature soft feel. 

OZ.1 Custom offers our full range of custom options. 

Srixon’s highest MOI Driver in the lineup, the ZXi MAX offers an easy swing feel and heightened forgiveness in a sharp, high-performance profile. A single adjustable weight placed low in the rear allows you to choose your preferred swing weight and maximize ZXi MAX’s high MOI benefits for total confidence on the tee box.

i-FLEX FACE

This completely redesigned face thickness pattern produces more efficient energy transfer at impact, increasing ball speed.

REBOUND FRAME

Rebound Frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and, ultimately, shot distance.

ADJUSTABILITY

A single adjustable weight placed low in the rear allows you to choose your preferred swing weight and maximize ZXi MAX’s MOI benefits. And an all-new, 1.5-degree hosel sleeve lets you fine tune Driver loft, lie, and face angle.

STAR FRAME CROWN

Complex latticework creates the structural integrity necessary to support an ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver’s ideal launch and spin characteristics.

LASER FACE MILLING

Brand new for ZXi Drivers, visible Laser Face Milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.

Srixon’s highest MOI Driver in the lineup, the ZXi MAX offers an easy swing feel and heightened forgiveness in a sharp, high-performance profile. A single adjustable weight placed low in the rear allows you to choose your preferred swing weight and maximize ZXi MAX’s high MOI benefits for total confidence on the tee box.

i-FLEX FACE

This completely redesigned face thickness pattern produces more efficient energy transfer at impact, increasing ball speed.

WOMEN’S-SPECIFIC BUILD

The Women’s ZXi Max Driver has all the same clubhead technology as the men’s model, but their components are optimized to fit female swings—such as ideal, shorter shafts with customized flex profiles. Plus, they come standard with an upgraded grip that provides comfort and great feedback.

REBOUND FRAME

Rebound Frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and, ultimately, shot distance.

ADJUSTABILITY

A single adjustable weight placed low in the rear allows you to choose your preferred swing weight and maximize ZXi MAX’s MOI benefits. And an all-new, 1.5-degree hosel sleeve lets you fine tune Driver loft, lie, and face angle.

STAR FRAME CROWN

Complex latticework creates the structural integrity necessary to support an ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver’s ideal launch and spin characteristics.

LASER FACE MILLING

Brand new for ZXi Drivers, visible Laser Face Milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.

The ZXi LS Driver’s advanced low spin profile is a perfect match for players with aggressive swings who want to dominate the distance game. Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics for a lower ball flight and extra yards after carry.

i-FLEX FACE

This completely redesigned face thickness pattern produces more efficient energy transfer at impact. The added strength of the interior i-FLEX face structure allows the center of the face to be thinner than last gen, increasing ball speed.

REBOUND FRAME

Rebound Frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and, ultimately, shot distance.

ADJUSTABILITY

Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics. And an all-new, 1.5-degree hosel sleeve lets you fine tune Driver loft, lie, and face angle.

STAR FRAME CROWN

Complex latticework creates the structural integrity necessary to support an ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver’s ideal launch and spin characteristics.

LASER FACE MILLING

Brand new for ZXi Drivers, visible Laser Face Milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.

The ZXi Driver combines blistering ball speed with exceptional MOI for a club that provides a player with superb drives and forgiveness while keeping spin relatively low. Two adjustable sole weights allow you to calibrate a preferred ball flight path with your personal swing characteristics.

i-FLEX FACE

This completely redesigned face thickness pattern produces more efficient energy transfer at impact. The added strength of the interior i-FLEX face structure allows the center of the face to be thinner than last gen, increasing ball speed.

REBOUND FRAME

Rebound Frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and, ultimately, shot distance.

ADJUSTABILITY

Two adjustable sole weights placed in the heel and toe allow you to adjust the swing weight and Center of Gravity to favor a draw or fade shot shape. And an all-new, 1.5-degree hosel sleeve lets you fine tune Driver loft, lie, and face angle.

STAR FRAME CROWN

Complex latticework creates the structural integrity necessary to support an ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver’s ideal launch and spin characteristics.

LASER FACE MILLING

Brand new for ZXi Drivers, visible Laser Face Milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

OZ.1i is L.A.B. Golf’s first putter model with a face insert. Its stainless steel insert provides a firmer feel and faster ball speeds.

OZ.1i Stock offers our most popular build specifications.

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

OZ.1i HS is the first heel-shafted putter with Lie Angle Balance, giving golfers the traditional look so many love with the ease of use that defines L.A.B. 

OZ.1i HS Stock offers our most popular build specifications. 

The KING TEC Mini Driver offers modern golfers more options off the tee. With its compact 303cc design, the TEC Mini provides versatility for a wide range of players who seek not only distance but also enhanced accuracy and confidence with their driver. Whether you are replacing an ineffective fairway wood or your current driver, the TEC Mini delivers exceptional playability, combining forgiveness and control in a small yet powerful package.

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

LINK.1 Stock is the “standard” build of our new blade-style putter. It’s available in our most popular Lie Angle of 69 degrees and in lengths of 33, 34, and 35 inches.

LINK.1 Stock is built to the same exacting standards as LINK.1 Custom. It’s 100% Made In the USA and built and balanced by L.A.B. Golf Craftsmen in our factory outside Eugene, Oregon.

The OPTM LS Titanium Fairway is engineered for dangerously high levels of speed and control. It has a compact, low-spin clubhead designed to lower POI, taking accuracy and control to the next level. This fairway delivers incredibly forgiving and accurate long-distance shot-making. Players will experience increased control with low spin performance paired with heightened forgiveness and tighter dispersion.

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

MEZZ.1 MAX Stock offers our popular build options and specifications. These options are a great fit for golfers that use fairly standard specs.

MEZZ.1 MAX Stock is 100% Made In the USA and built and balanced in Eugene, Oregon.

Queen B 16 – Precision Milled Elegance

Robert J. Bettinardi elevates the classic blade design with the new Queen B 16, a modern expression of timeless craftsmanship. This refined model features a traditional heel-toe weighted blade head with a wider flange and crowned topline, enhancing its clean, confident look at address.

The Center of Gravity aligns perfectly with the flange for improved stability and performance, while chamfered bumpers add subtle sophistication to the overall design. The Mini Honeycomb™ Face Milling, crafted with an 8% smaller tool, delivers Bettinardi’s softest Honeycomb™ feel to date and showcases the intricate milling detail that defines the Queen B series.

Each head is precision-milled from a single block of 303 Stainless Steel and finished in a luxurious Royal Rose PVD coating for unmatched durability, feedback, and consistency — the same tour-proven quality trusted by Bettinardi staffers around the world.

Specifications

• Model: Queen B 16

• Weight: 362 g

• Material: 303 Stainless Steel

• Finish: Royal Rose PVD

• Face Milling: Mini Honeycomb™

• Loft: 3°

• Lie: 70°

The all-new, never-before-seen Studio Stock 9 Plumber’s neck putter is a fresh take on the classic SS9 head shape. Milled from one solid block of 303 Stainless Steel, the one-piece milled Plumber’s neck provides one-third toe hang, perfect for those with a slight to moderate arc in their putting stroke. The high-toe topline gives the putter a classic, Tour-inspired blade appearance, while the mid-body flange design offers a confidence-inspiring view at address. The SS9 head shape was re-engineered with a more narrow and compact length heel to toe, allowing us to reposition the weight in the club in order to increase the MOI (Moment of Inertia). Coupling that with our Roll Control™ face milling, the SS9 is sure to be one of the most forgiving blades in our production lineup.

Through feedback from Tour players seeking a mallet-style putter with a more subtle profile, Sam Bettinardi designed the brand-new BB48. Engineered with sweeping shoulders that dip across the back flange and wane and vanish at the rear, the result is a mallet with a modest appearance that inspires confidence at address. The BB48 features a slant neck with a full shaft of offset for flawless alignment and setup and 1/3 toe hang, making it ideal for golfers with a moderate arc in their stroke. Our new Perpetual Flymill face ensures superior feel, remarkable control, and a consistent roll on every putt.

After a successful debut in the last BB line, RJB took his BB28 back to the workshop for some artful and game-changing modifications resulting in the newly refined BB28 Slotback. The new and improved wide-body blade is slightly more compact, with shortened heel-to-toe and pocket lengths, while also featuring taller muscles and bumpers. The slotback milled from the flange serves as a natural alignment aid, allowing you to frame the ball perfectly at address. The near-face-balanced BB28 Slotback has a single bend shaft that flows seamlessly into the spud neck, providing a three-quarter shaft of offset for simple setup and a consistently effortless putting stroke.

Building upon years of American-made craftsmanship, Robert J. Bettinardi has refined his timeless BB1 putter to further enhance its performance. Made in the U.S.A. from a single block of 303 Stainless Steel, the pocket of the new BB1 is milled slightly closer to the heel, resulting in a more balanced center of gravity. Precision-milled to 350 grams with a crowned topline and refreshed bumpers and shoulders, this putter provides players with the perfect optics at address. Our new Perpetual Flymill face milling offers supreme feel and audio feedback and an easily achieved true roll on the green. Through decades of innovating upon a timeless design, the BB1 is RJB’s modern mastery of a classic blade headshape

Introducing Bettinardi’s first generation of Simply Balanced™ “zero torque” putters. Engineered for ultimate stability, these putters keep the face square throughout the stroke, regardless of swing path, giving you unmatched control and consistency on the green. Our revolutionary Simply Balanced™ technology positions the shaft of the SB2 perfectly with the Center of Gravity, maintaining dynamic balance for a smooth and consistent stroke. The SB2 mallet is equipped with F.I.T.™ (Feel Impact Technology) face milling, delivering an exquisite softness and a responsive feel at impact. Its topline and two flange lines on the insert enhance contrast and make alignment effortless. The SB2 features a Diamond Blast 303 Stainless Steel face and a Diamond Blast 6061 Aluminum anodized center insert, set within a striking precision-milled Sapphire Blue 6061 Aluminum body. Robert J. Bettinardi designed the Antidote SB2 using the same premium metal favored by Bettinardi Tour Staffers worldwide. Simplify your putting with the Simply Balanced™ SB2.

Introducing Bettinardi’s first generation of Simply Balanced™ “zero torque” putters. Engineered for ultimate stability, these putters keep the face square throughout the stroke, regardless of swing path, giving you unmatched control and consistency on the green. Our revolutionary Simply Balanced™ technology positions the shaft perfectly with the Center of Gravity, maintaining dynamic balance for a smooth and consistent stroke. The SB1 blade features Bettinardi’s F.I.T.™ (Feel Impact Technology) face milling, delivering a soft and responsive feel at impact. The Diamond Blast finish reduces glare at address, complemented by a striking T-Alignment and a Sapphire Blue anodized 6061 Aluminum pocket insert. Robert J. Bettinardi designed the Antidote SB1 using 303 Stainless Steel, the same premium metal favored by Bettinardi Tour Staffers worldwide. Simplify your putting with the Simply Balanced™ SB1.

Regarded as one of the most popular Queen B heads ever produced, the QB8 was re-engineered with a one-piece milled Plumber’s neck and returns to the QB Series for the first time since 2018. Featuring a compact, squared off head shape with muscles that gently melt off the back flange, this classic model is for players seeking the ideal balance between blade design and mallet performance. The QB8 showcases refined characteristics and a Tour-inspired design, with softened, rounded edges on the heel and toe that create a modern, yet timeless aesthetic. A repositioned pocket helps achieve a Center of Gravity that is aligned with the center line, while the newly added Mini Plumber’s neck is optimal for golfers with a slight arc in their putting stroke. The Mini Honeycomb™ Face Milling enhances the putter's performance with an 8% smaller machining tool, resulting in the softest Honeycomb™ face to date, while beautifully highlighting the unique design. Each head in the Queen B Series is completed in a new Royal Rose PVD finish and crafted from one-piece milled 303 Stainless Steel, the same high-quality material favored by Bettinardi Tour staffers worldwide. This exquisite craftsmanship provides exceptional durability, responsiveness, and a solid feel, ensuring supreme performance on the green.

Re-introducing one of the most compact mallets ever designed by Robert J. Bettinardi, the Queen B 7 returns after 10 years to the 2025-2026 lineup. Based on feedback from the game's best players, the Queen B 7 was re-engineered to be Bettinardi’s first symmetrical mallet. The QB7 is meticulously crafted with precision-milled shoulders that seamlessly blend into the rounded flange, providing a timeless Bettinardi appearance. Our trademark one-piece milled Crescent neck ensures effortless setup at address and is ideal for players with a moderate arc in their putting stroke. The Mini Honeycomb™ Face Milling enhances the putter's performance with an 8% smaller machining tool, resulting in the softest Honeycomb™ face to date, while beautifully highlighting the unique design. Each head in the Queen B Series is completed in a new Royal Rose PVD finish and crafted from one-piece milled 303 Stainless Steel, the same high-quality material favored by Bettinardi Tour staffers worldwide. This exquisite craftsmanship provides exceptional durability, responsiveness, and a solid feel, ensuring supreme performance on the green.

Engineered for optimal balance and stability, the timeless Queen B 6 remains a staple model for our new Queen B Series. This heel-toe weighted, wide-body blade instills confidence in players seeking the ideal blend of a blade appearance and mallet performance. Highlighting refined characteristics, the QB6 was reshaped with softer bumpers and a repositioned pocket to achieve a Center of Gravity that is aligned with the center line. The single-bend shaft seamlessly flows into the forgiving head of the Queen B 6, facilitating an easier setup for players with a straight-back, straight-through putting stroke. The Mini Honeycomb™ Face Milling enhances the putter's performance with an 8% smaller machining tool, resulting in the softest Honeycomb™ face to date, while beautifully highlighting the distinct design. Each head in the Queen B Series is completed in a new Royal Rose PVD finish and crafted from one-piece milled 303 Stainless Steel, the same high-quality material favored by Bettinardi Tour staffers worldwide. This exquisite craftsmanship provides exceptional durability, responsiveness, and a solid feel, ensuring supreme performance on the green.

The newest iteration of the Studio Stock 14 features essential modifications made by Robert Bettinardi to perfect this classic blade putter. This heel-toe weighted blade offers a distinct appearance from address with its widened flange, flat topline, low profile shoulders, and newly rounded bumpers that melt off the putter head. The SS14 features a plumber’s neck and full shaft of offset that make setup and alignment effortless, while half toe hang facilitates a smooth arc through the putting stroke

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

A tour-inspired design meets Lie Angle Balance. OZ.1 uses an all-aluminum construction that delivers L.A.B. Golf’s signature soft feel.

OZ.1 Stock offers our most popular build specifications. 

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

DF3 Stock offers our popular build options and specifications. These options are a great fit for golfers that use fairly standard specs.

Ever since we launched our first putter, Directed Force, golfers have been asking if we could make it less weird. DF3 is that putter.

DF3 still does everything golfers love about the original. It stays square by itself. It’s still irrationally forgiving on mishits. But there’s a lot less to think about.

The DF3 is entirely CNC milled from 6061 aluminum, with 8 screws on the bottom made of steel or tungsten in various densities to precisely target swing weight and lie angle balance each putter.

Machined right here in the good ol' U.S.A., each head is then assembled and hand-balanced at our factory in Creswell, Oregon.

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

MEZZ.1 Stock makes it easy for any golfer to benefit from Lie Angle Balance. It looks pretty much like a normal putter. But it actually helps you make putts.

The INOVAI 10.0 combines the best of blade and mallet in a sleek, compact head that offers a brand-new look to the INOVAI Series. While resembling a wide-body blade, the two-piece construction of 303 Stainless Steel and 6061 Military-Grade Aluminum was engineered to shift weight toward the rear and perimeter of the putter, to give it the high MOI that players seek in a mallet. The simple shape of the body creates ideal visual cues at address, and the smooth flange is detailed with double sightlines for ease of setup and alignment. The 10.0 is perfect for players seeking to transition from a blade putter to a high-performance MOI mallet or players looking for a mallet with a more compact profile.

The all-new INOVAI 9.0 was designed by Bob Bettinardi to bring a full-body high-MOI mallet to the INOVAI Series. The wide body creates ideal visual cues with long sightlines, a tapered shape, and innovative stability wings for added control. Precision machining techniques create a seamless connection between the body and the face, which features a wide topline for ease of alignment. The sole was designed with a Fixed Depth Port which maximizes MOI by distributing weight to the perimeter, while also improving the Center of Gravity, resulting in a mallet with a remarkable balance of stability and control. The 303 Stainless Steel front piece with Roll Control™ face milling offers our softest feel and audible feedback preferred by Tour players with our proprietary groove design that promotes forward roll at impact, reducing skid and sidespin.

Previously seen only as a limited-run putter, Sam Bettinardi took the INOVAI 6.5 and gave it a sleeker, more compact design while preserving the immaculate fangs that form its signature hexagonal cutout. The fangs are shaped to optimize the putter’s MOI (Moment of Inertia), with triangular vents that distribute additional weight to the perimeter. The sleek lines of the 6061 Aluminum back piece and triple sightline offer perfect visual cues for simple setup and effortless alignment. The 303 Stainless Steel front piece features our Roll Control ™ face milling, our proprietary groove design which offers a soft feel and is designed to get the ball into a true roll faster.

Completely redesigned for 2024, the new INOVAI 6.0 offers a refreshingly clean and modern aesthetic with a stepless wing design for improved optics at address. The sole has been meticulously crafted with Variable Depth Ports to improve COG (Center of Gravity) placement up to a remarkable 27% relative to the center of the face, enhancing stability and performance. The 303 Stainless Steel front piece is milled with our proprietary Roll Control™ face milling, a groove design that promotes forward roll at impact to get the ball into a true roll faster. The optimized weighting of the 6061 Military Grade Aluminum back piece gives the INOVAI 6.0 improved feel and control to match the new look

Please Note: Expect delivery 2-3 weeks from the time of purchase. Lead times are subject to change.

We know… it looks a little funny. DF 2.1 users often spend the first few holes catching flak about the way their putter looks. And as the putts keep falling, they spend the rest of the round fielding questions from their playing partners about why it works so well.

How It’s Made

All DF 2.1 putters are manufactured and assembled in the USA. They’re 100% CNC milled from 6061 aircraft aluminum.

Alignment Markings

DF 2.1 Stock is available with our most requested alignment marking, Alignment Marking ?1. Looking for more Alignment Markings? Check out DF 2.1 Custom.

Grip

DF 2.1 Stock is available with our most popular grip, the Press II 3 Degree. For additional grip options, check out DF 2.1 Custom.

Shaft

DF 2.1 Stock is paired with a premium steel putter shaft. For additional shaft options, check out DF 2.1 Custom.

Headcover

Purchase includes DF 2.1 Headcover.

Specifications

• Finish: Type-3 Anodized Black
• Length: 33, 34, or 35 inches. Check out DF 2.1 Custom for additional lengths and options for Arm Lock and Sweeper putters. 
• Loft: 3.5 degrees static loft (0.5 degrees effective loft).

The Women's OPTM MAX Fairway combines maximium forgiveness and the ability to tune maximum draw-bias while maintaining as much speed as possible. The perfect option for players who struggle with a slice, experience our most forgiving fairway for more control over longer distances.

The OPTM MAX Fairway is intentionally formulated with a left-bias for players battling a slice. Strategic weight placement shifts the CG closer to the hosel, creating higher launch and quicker face closure. Extended use may result in straighter shots, enviable high soft draws, and a permanent reduction in slices.